Remove the supplied mounting bracket from the rear of the gauge by unscrewing the two thumb screws from the rear of the gauge.
The gauge is sized for a 2-1/16” or 52mm mounting hole. Use the mounting bracket to secure the gauge in place.
Plug in the supplied cable to the rear of the gauge. Either one of the two connectors may be used.
The cable length is 5’. If the optional 5’ extension cable is being used (part no. 41-001.10), the extension cable should be plugged in to the rear of the gauge first.
If using more than one gaugeART CAN Gauge, join the two gauges using the optional daisy chain cable (part no. 41-001.11).
