Supported ECU Channels: Hondata KPRO

The gaugeART CAN Video Gauge Adapter supports the following data channels.

Hondata KPRO 4:

  • Analog 0 – 7 (volts)
  • ECT (°C/°F)
  • Ethanol Content (%)
  • Ethanol Temp  (°C/°F)
  • Gear
  • IAT (°C/°F)
  • Ign Advance (°)
  • Injector Timing (ms)
  • Knock Count
  • Lambda (Lambda/AFR)
  • MAP (KPA/PSIg)
  • RPM
  • Speed (MPH/KPH)
  • TPS (%)
  • Voltage

Note that the Hondata KPRO4 does not include a terminating resistor on board. A 120 ohm resistor must be soldered to the KPRO 4 circuit board between CAN L & CAN H terminals.

CAN Output must be set to Hondata Protocol 250 kbps as shown below.