The gaugeART CAN Video Gauge Adapter supports the following data channels. See instructions for configuring datastream.
AEM EMS Series 2 (CAN):
- ADCR 8 (Volts)
- ADCR 11 (Volts)
- ADCR 13 (Volts)
- ADCR 14 (Volts)
- ADCR 15 (Volts)
- ADCR 16 (Volts)
- ADCR 17 (Volts)
- ADCR 18 (Volts)
- Air Temp (°C / °F)
- Battery Volts
- Coolant Temp (°C / °F)
- Engine Load / Boost Pressure (available as 2, 3, 3.5, 4, 5 & Honda MAP sensor – can also be displayed as a percent)
- Engine Speed (RPM)
- Ethanol Content (%)
- Gear Calculated
- Ignition (Degrees)
- Knock (Degrees)
- O2 #1 (AFR)
- O2 #2 (AFR)
- Oil Pressure (requires AEM 100 or 150 PSI sensor, or other compatible 0-100 or 0-150 PSI sensor)
- Oil Temperature (requires AEM part no 30-3012)
- Throttle
- Vehicle Speed (KPH / MPH)
The AEM EMS Series 2 CAN telemetry output can be customized by the user. Other channels are available but have not been tested by gaugeART.