The gaugeART 52mm CAN Gauge & Panel Mount CAN Gauge support the following data channels.
AEM Infinity (requires firmware v2.96.1 or later):
- Air Temp (ºC / ºF)
- Airbox Temp (ºC / ºF)
- Battery Volts
- Boost Target (PSIg / KPA)
- Charge Pressure (PSIg / KPA)
- ChargeOutTemp (ºC / ºF)
- Coolant Temp (ºC / ºF)
- Engine Speed (RPM)
- Engine Protect Output
- Flex Content (%, requires firmware 2.96.3 or later)
- Fuel Pressure (PSIg / KPA)
- Gear Calculated
- Ignition Timing (Degrees)
- Injector 1 Lambda Feedback (Lambda / AFR)
- Injector 1 Pulsewidth (mS)
- Knock, Feedback Cyl 1 (Degrees)
- Knock, Lambda Trim (Lambda / AFR)
- Lambda Target (Lambda / AFR)
- MAP (PSIg / KPA)
- MIL Output
- Mode Switch
- N20 Active
- O2 #1 (Lambda / AFR)
- O2 #2 (Lambda / AFR, requires firmware 2.96.3 or later)
- Oil Pressure (PSIg / KPA)
- Oil Temp (ºC / ºF)
- TC_SlipTarget (MPH / KPH)
- Throttle (%)
- Trans Temp (ºC / ºF)
- Vehicle Speed (MPH / KPH)