The gaugeART 52mm CAN Gauge & Panel Mount CAN Gauge support the following data channels.
MoTeC M1 (standard 0x640 based protocol)
- Air Box Temp (ºC / ºF)
- Battery Volts
- Boost Aim (PSIg / KPA)
- Boost Pressure (PSIg / KPA)
- Closed Loop Trim B1 (%)
- Closed Loop Trim B2 (%)
- Coolant Temp (ºC / ºF)
- Engine Load (mg)
- Engine Oil Pressure (PSIg / KPA)
- Engine Oil Temp (ºC / ºF)
- Engine Speed (RPM)
- Exhaust Temp (ºC / ºF)
- Fuel Composition / Ethanol Content (%)
- Fuel Temp (ºC / ºF)
- Fuel Pressure (PSIg / KPA)
- Gear Position
- Ignition Duty (%)
- Inlet Air Temp (ºC / ºF)
- Knock Warning
- Lambda (Lambda / AFR)
- Lambda Target (Lambda / AFR)
- MAP (PSIg / KPA)
- Throttle Position (%)
- Vehicle Speed (MPH / KPH)
- Wheel Speed FL (MPH / KPH)
- Wheel Speed FR (MPH / KPH)
- Wheel Speed RL (MPH / KPH)
- Wheel Speed RR (MPH / KPH)