Change Wi-Fi SSID When Using Two CAN Gauges

To use to gaugeART CAN Gauges (52mm, Panel Mount, or any combination of either) the second gauge can be programmed to change its Wi-Fi SSID to “gaugeART2”. This allows you two switch between the two gauges with different SSIDs broadcasted (gaugeART and gaugeART2) to program each individually.

To change the default SSID on one gauge to gaugeART2:

  1. Power on the gauge. Wait until the gaugeART logo splash screen is finished printing.
  2. Press and hold both buttons on the gauge face together. Hold the buttons down until a message is displayed that indicates the SSID has been changed.
  3. Power off the gauge.
  4. Power on the gauge – the gauge will now broadcast an SSID of “gaugeART2”.

If the gauge ever needs to be reset to the default SSID:

  1. Power off the gauge.
  2. Press and hold the right button and power on the gauge. Continue to press the button down until the gaugeART logo splash screen is finished printing.
  3. Power off the gauge.
  4. Power on the gauge – the gauge will now broadcast an SSID of “gaugeART”.