my display is blank (no video signal is displayed).
- Check that your display is on and set to the correct source.
- Make sure gaugeART is powered.
- If you are using a composite converter, make sure the converter is powered and wired properly.
- If you are using an HDMI input, and the video signal is not recognized, the display not be compatible with the standard gaugeART resolution of 800×480. If this is the case, go to gaugeDesigner.com and download the 720×480 design (see the gaugeDesigner instructions).
The gaugeART start up screen and background is displayed, but no gauges are shown.
- This indicates that gaugeART is powered on, and your display is configured properly, but that no data is being received, or the data being received is not formatted properly.
- Make sure that the serial cable between the ECU and gaugeART is installed properly.
- Make sure that your ECU telemetry is configured properly.
The background and gauges display, but the gauges don’t seem to make any sense.
- Your ECU telemetry must be enabled and configured properly.
- Check your design to make sure you have the channel and units (ie. Fahrenheit or Celsius) set correctly.
If these solutions do not resolve your problem, e-mail technical support: info@gaugeART.com with the gaugeART part number you own, the ECU you are using, and a description of the problem with photos as needed.