The gaugeART 52mm CAN Gauge & Panel Mount CAN Gauge support the following data channels.
Syvecs S6, S6Plus, S8:
- Air/Fuel Ratio
- Air Intake Temp (ºF / ºC)
- Battery Volts
- Calibration Switch
- Cam Angle, Target (Degrees)
- Cam Angle, Actual (Degrees)
- Coolant Temp (ºF / ºC)
- Exhaust Gas Temperature (ºF / ºC)
- Engine Speed (RPM)
- Ethanol Content (%)
- Fuel Press (mBar / PSIg)
- Fuel Temperature (ºF / ºC)
- Gear
- Ignition Timing (Degrees)
- Injector Timing (mS)
- Knock, Cyl 1 (Degrees)
- Lambda 1 (AFR / Lambda)
- Lambda 2 (AFR / Lambda)
- Manifold Pressure (PSIg/KPA)
- Oil Press (mBar / PSIg)
- Oil Temp (mBar / PSIg)
- Throttle Position (%)
- Traction Control Switch
- Vehicle Speed (MPH / KPH)
- Wastegate Target (mBar / PSIg)
- Wheel Spin (%)
Click here for instructions on how to setup your Syvec ECU’s CAN telemetry.