The gaugeART 52mm CAN Gauge & Panel Mount CAN Gauge support the following data channels.
Link & Vi-PEC (compatible with G4+, G4X, G5 ECUs):
Standard channels:
- Air Inlet Temp (ºF/ºC)
- Battery Volts (V)
- Barometric Pressure (PSIa/KPA)
- Boost Target (PSIg/KPA)
- CAN TC 1-8 (ºF/ºC)
- Coolant Temp (ºF/ºC)
- Driven Wheel Speed (MPH/KPH)
- Driving Wheel Speed (MPH/KPH)
- Ethanol Content (%)
- Fault Codes
- Fuel Pressure (PSIg / KPA)
- Fuel Temperature (ºF/ºC)
- Gear Position
- GP Temp 1-3 (ºF/ºC)
- GP Press 1-2 (PSI/KPA)
- Ignition Timing (º)
- Injector Duty (%)
- Instant Fuel/Distance (MPG/LPKM)
- Knock Level 1
- Knock Count Global
- Knock Level Detected
- Knock Level Global
- Lambda 1 (Lambda / AFR)
- Lambda 2 (Lambda / AFR)
- MAP (PSIg/KPA)
- Math Block 1-2
- Mass Air Flow (G/S)
- Oil Pressure (PSIg / KPA)
- Oil Temp (ºC / ºF)
- RPM
- TPS (%)
- Wheel Speed LF (MPH/KPH)
- Wheel Speed LR (MPH/KPH)
- Wheel Speed RF (MPH/KPH)
- Wheel Speed RR (MPH/KPH)
Click here for instructions on how to setup your Link / Vipec ECU’s telemetry.