Supported ECU Channels: Syvecs

The gaugeART CAN Gauge supports the following data channels.

Syvecs S6, S6Plus, S8:

  • Air/Fuel Ratio
  • Air Intake Temp (ºF / ºC)
  • Battery Volts
  • Calibration Switch
  • Cam Angle, Target (Degrees)
  • Cam Angle, Actual (Degrees)
  • Coolant Temp (ºF / ºC)
  • Exhaust Gas Temperature (ºF / ºC)
  • Engine Speed (RPM)
  • Ethanol Content (%)
  • Fuel Press (mBar / PSIg)
  • Fuel Temperature (ºF / ºC)
  • Gear
  • Ignition Timing (Degrees)
  • Injector Timing (mS)
  • Knock, Cyl 1 (Degrees)
  • Lambda 1 (AFR / Lambda)
  • Lambda 2 (AFR / Lambda)
  • Manifold Pressure (PSIg/KPA)
  • Oil Press (mBar / PSIg)
  • Oil Temp (mBar / PSIg)
  • Throttle Position (%)
  • Traction Control Switch
  • Vehicle Speed (MPH / KPH)
  • Wastegate Target (mBar / PSIg)
  • Wheel Spin (%)

Click here for instructions on how to setup your Syvec ECU’s CAN telemetry.